100GE and 400GE line cards, and up to 288 x 400GE and 1152 x 100GE line-rate ports
Communication at the maximum distance of 120 km and easy DCI
Hardware-level redundancy, ensuring nonstop services and data center network stability
MACsec data encryption and transmission, effectively protecting service data security
Innovative technology design and efficient heat dissipation, with more than 50,000 kWh saved per device each year
Telemetry-based network monitoring and automated O&M, making management simple and efficient

Функции
Технические характеристики
Resources
Информация для заказа

Sales Enquiry

Функции

Data Center 400GE Modular
Core Switch
RG-N18010-XH

The RG-N18010-XH provides 10 module
slots, including eight service slots, which can
be used with 100GE and 400GE line cards. It
supports 800GE line cards in the future,
easily coping with future bandwidth
expansion needs.
With various port types, the RG-N18010-XH
supports up to 288 x 400GE and 1152 x
100GE line-rate ports, and allows smooth
evolution to 800GE, satisfying requirements
in diversified scenarios of data center
networks.

Innovative Architecture Design,
Achieving Highly Efficient Data Transmission

Zero Midplane

Clos Architecture

Service line cards are directly connected to SFUs, without the use of the midplane. Data can directly reach the SFU, with a
short distance. This significantly reduces the transmission loss and achieves efficient data transmission.

Communication at the Maximum Distance of 120 KM and Easy DCI

400GE ZR/ZR+ optical modules are used for interconnection, reducing Optical Transport Units (OTUs) and helping a cloud or hyper-scale
data center network to adapt to growing high-bandwidth services

Hardware-level Redundancy,
Ensuring Nonstop Services and Data
Center Network Stability

SFUs in N+1 Redundancy Mode

SFUs use N+1 redundancy and work in load balancing
mode, ensuring nonstop services.

Power Modules in M+N Redundancy Mode

Ten hot-swappable power modules are available. When a
fault occurs, services are switched within seconds. Services
are not interrupted when a power module is replaced. The
switch provides different protection measures for links.

Fan Trays in 2+1 Redundancy Mode

Three hot-swappable fan trays are available. The speed of
fan modules can be intelligently adjusted, ensuring highly
efficient heat dissipation.

Supervisor Engin es in 1+1 Redundancy Mode

The 1+1 hot standby design ensure continuous operation of
the switch.

Innovative Technology Design and Highly Efficient Heat Dissipation

MACsec Data Encryption and Transmission,
Effectively Protecting Service Data Security

MACsec provides hardware-level data encryption. With MACsec and 802.1X configured, the switch can strictly identify and verify transmitted data.
With MACsec, the switch achieves interface-based secure line-rate transmission, effectively preventing data from being intercepted and obtained maliciously
and ensuring service data security.

Telemetry-based Network Monitoring and Automated O&M,
Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.
The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time,
making network management more efficient and accurate.

Технические характеристики

Hardware Specifications

System	RG-N18010-XH
Switching Capacity	230.4Tbps
Packet Forwarding Rate	43200 Mpps
Slots	RG-N18010-XH
Module Slots	10 (2 for supervisor modules)
Switch Fabric Module Slots	8
Fan module	Three fan module slots
Power module	Ten power module slots
Dimensions and Weight	RG-N18010-XH
Dimensions (W × D × H)	Without cable management brackets: 442 mm × 896 mm × 708 mm (17.40 in. x 35.28 in. x 27.87 in., 16 RU) With cable management brackets: 442 mm × 935 mm × 708 mm (17.40 in. x 36.81 in. x 27.87 in., 16 RU)
Weight	96.4 kg (212.53 lbs., including the fan)
Power Supply and Consumption	RG-N18010-XH
Power Supply	RG-PAH3000I-F: ● AC: 100 VAC to 176 VAC, power: 1500 W ● AC: 176 VAC to 240 VAC, power: 3000 W ● HVDC: 240 V DC to 380 V DC, power consumption: 3000 W
Ventilation type	Front-to-rear ventilation
Maximum Power Consumption	19000 W
Environment and Reliability	RG-N18010-XH
MTBF	> 692,000 hours
Operating Temperature	0ºC to 40ºC (32ºF to 104ºF)
Storage Temperature	–40ºC to +70ºC (–40ºF to +158ºF)
Operating Humidity	10%RH to 90% RH (non-condensing)
Storage humidity	5% to 95% RH (non-condensing)
Altitude	● Operating altitude for long-term working conditions: up to 5000 m (16404.20 ft.). At 1800 m (5905.51 ft.), the maximum operating temperature is 40°C (104°F). The maximum operating temperature decreases by 1°C (1.8°F) per 200 m(656.16 ft.) increase in altitude. ● Operating altitude: up to 5000 m (16404.20 ft.) ● Storage altitude: up to 5000 m (16404.20 ft.)

Software Specifications

Software Specifications	RG-N18010-XH
Device virtualization	Virtual Switching Unit 3.0
Data center features	#SRv6 VXLAN bridge VXLAN gateway BGP-EVPN VXLAN VXLAN mapping IPv6 VXLAN over IPv4 M-LAG
SDN	OpenFlow 1.3.
Traffic Analysis	sFLOW IPFIX
L2 Features	Jumbo frame IEEE 802.3ad (static link aggregation, LACP, cross-card link aggregation, cross-device link aggregation) IEEE 802.1Q STP, RSTP, MSTP GVRP QinQ LLDP Static MAC addresses, address filtering, and limit on the number of MAC addresses
IPv4 Features	Static routing, RIP, OSPF, IS-IS, and BGP4 VRRP ECMP Policy-based routing Manual tunnel and GRE tunnel
IPv6 Features	Static routing, OSPFv3, BGP4+, IS-ISv6, and MLDv1/v2 VRRPv3 ECMP Policy-based routing Path MTU Discovery Manual tunnel and GRE tunnel Pingv6, telnetv6, FTPv6, TFTPv6, DNSv6, ICMPv6
Multicast	IGMP v1/v2/v3 IGMP snooping IGMP proxy PIM-DM, PIM-SM, PIM-SSM, and other multicast routing protocols MLDv1, MLDv2 Multicast static routing Fast leave
MPLS	MPLS L3VPN MPLS LDP #SR MPLS（Segment Routing） #SR-TE
ACL	Standard, extended, and expert-level ACLs Global ACLs Ingress/Egress ACLs IPv6 ACLs
QoS	Mapping of IEEE 802.1p, DSCP, and ToS priorities Priority marking/remarking Multiple queue scheduling mechanisms, including SP, WFQ, SP+WFR, Congestion avoidance mechanisms such as RED and WRED Port-based rate limit
Reliability	Independent switch fabric modules and independent supervisor modules to implement thorough separation of the forwarding plane from the control plane 1+1 redundancy for supervisor modules N+1 redundancy for switch fabric modules N+M redundancy for power supply modules and fans Backplane-free design to avoid single point of failures Hot swapping of components Hot patch function and online installation of patches BPDU Guard/Loop Guard/Root Guard NSR DLDP FRR GR for OSPF/IS-IS/BGP BFD for VRRP/OSPF/BGP4/ISIS/ISISv6/static routing
Security	MacSec Network Foundation Protection Policy (NFPP) and CPU protection policy (CPP) to prevent protocol packet attacks Prevention against DDoS, ARP, and ICMP attacks DAI, port security, IP source guard, and port protection uRPF RADIUS and TACACS user login authentication, password security, hierarchical user management, and password protection Source IP address restriction Function of not sending unknown multicast packets to the CPU Suppression of unknown multicast, unknown broadcast, and unknown multicast packets SSHv2, providing encrypted security channels for user login Prevention against MAC address flapping Plaintext and MD5 ciphertext authentication for OSPF, RIPv2, and BGP4 packets
Management	Console/AUX Modem/Telnet/SSH2.0 CLI configuration FTP, TFTP, Xmodem, and SFTP SNMP V1/V2c/V3 NETCONF RMON NTP clock Fault alarm and auto-recovery System operation logging Traffic analysis Zero-touch provisioning (ZTP) Reliable network service (RNS), which probes specific services provided by the peer device to monitor the service availability Telemetry Buffer status monitoring and traffic microburst identification Port mirroring, traffic mirroring, and ERSPAN Physical ports on all line cards support the routing mode and IP addresses can be configured independently. Monitoring of fan modules and power supply modules

Safety and Regulatory Compliance

Specification	RG-N18010-XH
Safety	● IEC 62368-1 ● EN IEC 62368-1 ● GB 4943.1
Electromagnetic Compatibility (EMC)	● EN 55032 ● EN 55035 ● EN IEC 61000-3-2 ● EN 61000-3-3 ● EN 300 386 V2.2.1 ● GB/T 9254.1
Environment	● 2011/65/EU EN 50581 ● 2012/19/EU EN 50419 ● (EC) No.1907/2006 ● GB/T 26572

*For more country-specific regulatory information and approvals, contact your local sales agency.

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Информация для заказа

Perform the following steps to configure an RG-N18000-XH series device:

Select the switch and supervisor module.
Select the line cards and switch fabric modules based on the service requirements. If redundancy is required, youare advised to install all switch fabric modules for N+1 bandwidth redundancy.

Select the power supply modules based on the power requirements of the entire device. (N+1 redundancy is recommended at a minimal level.)

Chassis and Supervisor Module

Model	Description
RG-N18010-XH	RG-N18010-XH chassis, excluding power supply modules, with all fans
M18000XH-CM	M18000XH-CM supervisor module

Power Supply Modules

Model	Description
RG-PAH3000I-F	3000 W AC power supply module (AC and 240 V to 380 V HVDC)

Switch Fabric Modules

Model	Description
M18010XH-FE-E II	Type-E switch fabric module II for RG-N18010-X, used together with CE cards

Line Cards

Model	Description
M18000XH-36QC-CES	36-port 400GE (QSFP-DD) Ethernet fiber interface card, CE card, used together with Type-E switch fabric modules
M18000XH-48CQ-CES	48-port 100GE (QSFP28) Ethernet fiber interface card, CE card, used together with Type-E switch fabric modules

400GBASE Series Optical Modules

Model	Description
400G-QDD-DR4-SM1310	400G DR4 module, QSFP-DD form factor, MPO-12 APC, 1310 nm, 500 m (1,640.42 ft.) over SMF
400G-QDD-FR4-SM1310	400G FR4 module, QSFP-DD form factor, Duplex LC, 1310 nm, 2 km (6,561.68 ft.) over SMF
400G-QDD-SR8-MM850	00G SR8 module, QSFP-DD form factor, MPO-16 APC, 850 nm, 100 m (328.08 ft.) over MMF

100GBASE Series Optical Modules

Model	Description
100G-QSFP-LR4-SM1310	100G LR4 module, QSFP28 form factor, Duplex LC, 1310 nm, 10 km (32,808.40 ft.) over SMF
100G-QSFP-iLR4-SM1310	100G iLR4 module, QSFP28 form factor, Duplex LC, 1310 nm, 2 km (6,561.68 ft.) over SMF
100G-QSFP-ER4-SM1310	100G ER4 module, QSFP28 form factor, Duplex LC, 1310 nm, 40 km (131,233.59 ft.) over SMF
100G-QSFP-SR-MM850	100G SR module, QSFP28 form factor, MPO, 850 nm, 100 m (328.08 ft.) over MMF
100G-AOC-5M	100G QSFP28 AOC cable, 5 m (16.40 ft.)
100G-AOC-10M	100G QSFP28 AOC cable, 10 m (32.81 ft.)

40GBASE Series Optical Modules

Model	Description
40G-QSFP-LX4-SM1310	40G LX4 module, QSFP+ form factor, Duplex LC connector, 150 m (492.13 ft.) over OM3/OM4 MMF, or 2 km (6,561.68 ft.) over SMF
40G-QSFP-LR4-SM1310	40G LR4 module, QSFP+ form factor, Duplex LC, 10 km (32,808.40 ft.) over SMF
40G-QSFP-iLR4-SM1310	40G iLR4 module, QSFP+ form factor, Duplex LC, 2 km (6,561.68 ft.) over SMF
40G-QSFP-LSR-MM850	40G LSR module, QSFP+ form factor, MPO, 400 m (1,312.34 ft.) over MMF
40G-QSFP-SR-MM850	40G SR module, QSFP+ form factor, MPO, 150 m (492.13 ft.) over MMF
40G-AOC-30M	40G QSFP+ AOC cable, 30 m (98.43 ft.)
40G-AOC-5M	40G QSFP+ AOC cable, 5 m (16.40 ft.)

Education

5-Star Hotel Solution

RG-N18010-XH – Next Generation Data Center Network High-Density Centralized Modular Core Switch with 100GE/400GE Line Cards and Eight Service Slots

100GE and 400GE line cards, and up to 288 x 400GE and 1152 x 100GE line-rate ports

Communication at the maximum distance of 120 km and easy DCI

Hardware-level redundancy, ensuring nonstop services and data center network stability

MACsec data encryption and transmission, effectively protecting service data security

Innovative technology design and efficient heat dissipation, with more than 50,000 kWh saved per device each year

Telemetry-based network monitoring and automated O&M, making management simple and efficient

Data Center 400GE Modular
Core Switch
RG-N18010-XH