Dimensions and Weight

RG-AP720-L

Unit dimensions(W x D x H)

194 mm x 194 mm x 37 mm (7.64 in. x 7.64 in. x 1.46 in.)

Shipping dimensions(W x D x H)

460 mm x 360 mm x 242 mm (18.11 in. x 14.17 in. x 9.53 in.)

Unit weight

Main unit: 0.42 kg (0.93 lbs)

Mounting bracket: 0.07 kg (0.15 lbs)

Shipping weight

0.87 kg (1.92 lbs)

Mounting

Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)

Lock option

Kensington lock and securing latch

Wi-Fi Radio

RG-AP720-L

Radio design

Dual-radio and up to four spatial streams:

● Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO

● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO

Operating frequencies

Radio 1, 802.11b/g/n:

● 2.400 GHz to 2.4835 GHz, ISM

Radio 2, 802.11a/n/ac: 

● 5.150 GHz to 5.250 GHz, U-NII-1

● 5.250 GHz to 5.350 GHz, U-NII-2A

● 5.470 GHz to 5.725 GHz, U-NII-2C

● 5.725 GHz to 5.850 GHz, U-NII-3/ISM

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Data rates

Combined peak data rate: 1.167 Gbps

2.4 GHz radio

● Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2SS HT40 802.11n client devices (maximum)

● Two spatial stream Single User (SU) MIMO for up to 144.4 Mbps wireless data rate to individual 2SS HT20 802.11n client devices (typical)

5 GHz radio

● Two spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate to individual 2SS HT80 802.11ac client devices (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

● 802.11b: 1, 2, 5.5, 11

● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

5 GHz radio

● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80)

Packet aggregation

802.11n/ac: A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)

Antenna gain

2.4 GHz: 4.3 dBi

5 GHz: 5.7 dBi

Maximum transmit power

2.4 GHz radio: 26 dBm (23 dBm per chain)

5 GHz radio: 26 dBm (23 dBm per chain)

Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.

Thailand

2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm

5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm

5.470 GHz to 5.725 GHz. EIRP ≤ 30 dBm

5.725 GHz to 5.825 GHz, EIRP ≤ 30 dBm

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Wi-Fi Radio Frequency Performance

RG-AP720-L

Frequency Band and Protocol

Data Rate

Maximum Transmit Power per Transmit Chain

Maximum Receive Sensitivity per Receive Chain

2.4 GHz, 802.11b

1 Mbps

23 dBm

–91 dBm

2 Mbps

23 dBm

–89dBm

5.5 Mbps

23 dBm

–88 dBm

11 Mbps

23 dBm

–85 dBm

2.4 GHz, 802.11g

6 Mbps

23 dBm

–89 dBm

24 Mbps

23 dBm

–80 dBm

36 Mbps

21 dBm

–76 dBm

54 Mbps

19 dBm

–70 dBm

2.4 GHz, 802.11n (HT20)

MCS0

21 dBm

–83 dBm

MCS7

19 dBm

–65 dBm

2.4 GHz, 802.11n (HT40)

MCS0

21 dBm

–80 dBm

MCS7

18 dBm

–62 dBm

5 GHz, 802.11a

6 Mbps

23 dBm

–89 dBm

24 Mbps

23 dBm

–80 dBm

36 Mbps

21 dBm

–76 dBm

54 Mbps

19 dBm

–70 dBm

5 GHz, 802.11n (HT20)

MCS0

20 dBm

–83 dBm

MCS7

18 dBm

–65 dBm

5 GHz, 802.11n (HT40)

MCS0

19 dBm

–80 dBm

MCS7

18 dBm

–62 dBm

5 GHz, 802.11ac (VHT20)

MCS0

20 dBm

–82 dBm

MCS9

17 dBm

–57 dBm

5 GHz, 802.11ac (VHT40)

MCS0

19 dBm

–79 dBm

MCS9

16 dBm

–54 dBm

5 GHz, 802.11ac (VHT80)

MCS0

19 dBm

–76 dBm

MCS9

16 dBm

–51 dBm

5 GHz, 802.11n (HT20)

MCS0

20 dBm

–83 dBm

MCS11

18 dBm

–65 dBm

5 GHz, 802.11n (HT40)

MCS0

19 dBm

–80 dBm

MCS11

18 dBm

–62 dBm

Ports Specifications

RG-AP720-L

Fixed service port

1 x 10/100/1000BASE-T port

● In compliance with IEEE 802.3af standard (PoE)

● Auto MDI/MDIX crossover

● PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)

● 802.3az EEE

Fixed management port

1 x RJ45 console port (serial console port)

Status LED

1 x multi-color system status LED

Button

1 x Reset button

● Press the button for shorter than 2 seconds. Then the device restarts.

● Press the button for longer than 3 seconds. Then the device restores to factory settings.

Power Supply and Consumption

RG-AP720-L

Input power supply

The AP supports the following two power supply modes:

● 12 V DC/1.5 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.

● PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).

Note:

● If both DC power and PoE are available, DC power is preferred.

Overall power consumption

Maximum power consumption: 12.95 W

● DC powered: 12.95 W

● PoE powered (802.3af): 12.95 W

● PoE+ powered (802.3at): 12.95 W

● PoE++ powered (802.3bt): 12.95 W

● Idle mode: 6 W

Environment and Reliability

RG-AP720-L

Temperature

Operating temperature: –10°C to +50°C (14°F to +122°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity: 5% RH to 95% RH (non-condensing)

Storage humidity: 5% RH to 95% RH (non-condensing)

Mean Time Between Failure (MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)

Regulatory Compliance

RG-AP720-L

Security regulations

IEC 62368-1

EN 62368-1

EMC regulations

EN 55032

EN 55035

EN IEC 61000-3-2

EN 61000-3-3

EN 301 489-1

EN 301 489-3

EN 301 489-17

Radio frequency regulations

EN 300 328

EN 301 893

EN 300 440

EN 62311

EN IEC 62311

EN 50665:2017

FCC Part 15

Applicable Software Version

RG-AP720-L

Applicable software version

RGOS 11.1(9)B1P30 or higher

WLAN

RG-AP720-L

Recommended maximum number of active devices per AP

64

Maximum number of associated clients

256

 Note

The number of associated clients varies according to the environment.

Maximum number of BSSIDs

32 (up to 16 BSSIDs per radio)

STA management

SSID hiding

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. 

Remote intelligent perception technology (RIPT)

Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming

Security

RG-AP720-L

Authentication and encryption

Remote Authentication Dial-In User Service (RADIUS)

PSK, web, 802.1X and MSCHAPv2 authentication

SMS authentication (used with the RG-WS series wireless access controller)

MAB authentication (used with the RG-WS series wireless access controller)

WPA (TKIP), WPA-PSK, WPA2, WEP (64/128-bit)

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist

ACL

Dynamic ACL assignment based on 802.1X authentication (used with the AC)

CPP

Supported

NFPP

Supported

Routing and Switching

RG-AP720-L

IP service

Static IPv4 address

IPv4 DHCP client

FTP ALG and DNS ALG

Multicast

Multicast

Multicast-to-unicast conversion

IPv6 basics

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping, IPv6 Tracert

IP routing

IPv4/IPv6 static routing

VPN

PPPoE client

Management

RG-AP720-L

Network management

Fault inspection and alarm

Information statistics and logging

SNMPv1/v2c/v3

NTP Server and NTP Client

Network management platform

Ruijie Cloud

Web-based management (Eweb)

User access management

Console, Telnet, SSH, SNMP and TFTP-based management

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.

When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.

When the AP works in Cloud mode, it can be managed through Ruijie Cloud.